Pos.01 | BE Binary Inputs DIN RAIL to read out floating contacts. |
---|---|
![]() BE-04000
|
Description: The MDT Binary Input is available in 3 versions, input detection of 24VAC/DC signals, input detection of 230VAC signals and reading out of floating contacts. The Binary Input reacts depending on its programmed parameters and sends a telegram on the KNX bus.
(e.g. window closed or sending second object) |
Pos.02 | BE Universal Interface to read out floating contacts. |
![]() BE-02001
|
Description: The inputs of the MDT Universal Interface react depending on their programmed parameters and send a telegram on the KNX bus.
You can connect conventional push-buttons or auxiliary contacts (e.g. door and window contacts) to the device.
|
Pos.03 | AIO Analog IN-/Output. |
![]() AIO-0210V
|
Description: The MDT Analog In-/Output is suitable to control devices with 0-10V inputs and to catch 0-20mA/0-10V measurement data. All channels are gavanically isolated from the KNX bus and can be configured independently from each other as input or output. The input voltage range is from 0-10V or from 2-10V, optionally the inputs can be operated as current loop with 0-20mA or 4-20mA. Each input can be parameterized individually with the ETS.
- Conversation of measuring unit and DPT can be parameterized - Min/max function, wire breakage detection - Threshold and traffic light function - Control by 1Byte, 2Byte float or 1Bit objects - Day/night function to limit control value - Emergency mode if given value fails |